Double Glazed Window Repair
It is worth looking into the warranty included with most double-glazed windows. It generally covers any problems with the window hardware such as hinges and locking mechanisms - within the first 10 years.
Mist between the glass windows is often caused by a break in the seal and requires immediate repair to stop damp or mould developing in your property.
Condensation Between the Windows
If condensation forms between windows in your home, it is an indication that the seal that holds the gas that insulates between the panes has failed. This is a serious problem that must be dealt with immediately, especially during winter, when humidity levels are at their highest. This could also cause damage to the sills, sealant and mould.
Ideally double-glazed windows shouldn't have condensation between the panes. This issue is often caused by excessive humidity or a particularly cold snap. The issue can usually be resolved without the need to replace an entire window. A professional can drill small holes in the glass and then spray the inside of the window with a specially-formulated cleaning solution. upvc window repairs is then removed from the window, and an anti-fogger device may be fitted to prevent further moisture buildup in the future.
Condensation may also occur between the windows due to air leakage, or any other cause outside the window. If this is the case, it will likely take longer for the moisture to accumulate in the window, as the air has to be warm enough for the water molecules to vaporise. In these situations, it is better to replace double-glazed windows rather than to try to repair the sealed units.
Double-glazed glass windows are composed of two or more pieces of tempered insulated glass that are held together by a metal framework. The space between the windows is filled with an insulating gas such as Krypton or argon, and then sealed. The seal is responsible for stopping the gas used to insulate from escaping, and it also stops air and moisture from entering into the gap.
As the windows age, the seals weaken and let moisture in the gap between the glass panes. If the seals begin to leak, it is important to be aware of this since it means that the double glazing isn't performing as well as before. This could result in lower energy efficiency, higher heating bills, damage to the property and the risk of condensation between the windows.
Mist
If you have condensation on the outside of your windows, this is normal and means that your double-glazed is in good working order and retaining the heat in your home. The condensation occurs because the air outside is warmer than the glass, and reaches its dew point before the window does. This is one of the great benefits of having good quality double glazing.
If you see condensation on the inside of the window, this could be an indication of an issue with ventilation in your home. The excess moisture won't go anywhere else and will end up on the carpet, window furniture, and other areas of your home. This can be prevented by having it examined by a professional and making sure that there is plenty of fresh air inside your home.
Another reason you could get mist on your double glazed window is that the seal between the two panes has broken down. This could be due to wear and tear or chemical cleaning solutions that are being employed. If this happens it is best to repair the windows as soon as possible.
Having your windows professionally repaired will ensure that they remain watertight and free from condensation, fogging and misting. It's also cheaper than replacing them completely and will reduce your energy costs.
A registered window installer with FENSA will provide you with a cost estimate to repair or replace your double-glazed windows. If your windows are old and have been in use for a long time, you may want to think about changing them to new A-rated energy efficient windows.
It is best to keep copies of any warranties and agreements with the window installers. This will be very helpful should any issues with the windows arise in the future, and you can then contact your window fitters to resolve these issues. This is a far better option than simply not addressing the issue that only make the problem worse and may lead to other issues within the home.
The difficulty of opening or closing the door
It's not only annoying when double-glazed windows can be difficult to open or close. They could also lead to higher energy bills because of the loss of heat and drafts. It can also pose a security risk, especially when the locks aren't working properly. It is important to repair double-glazed doors and windows in the earliest time possible.
If you're unable to open your window and have tried the simplest solution such as using a screwdriver in order to break it open, or tapping the frame with a hard object, then the problem may be more serious. The window could have moved and needs to be re-set or there may be a gap between glass and frames. In either case, you should call in an experienced double glazing repair expert to make sure that the proper repairs are done and to prevent any further problems.
It isn't uncommon for UPVC window handles and lock mechanisms to get stuck or difficult to operate particularly when they're worn out and worn. This is usually due to an accumulation of dirt or grease inside the handle. This can be easily solved by cleaning it using a uPVC cleanser. If this doesn't work then you could try gently tapping the uPVC frame with a hard object such as a screwdriver, taking care not to scratch the handle or the mechanism for window handles.
If this doesn't solve the issue, then the window may need to be replaced, since it is likely that the hinges are no properly aligned, or the locking mechanisms are damaged. In this case you should consult an UPVC window expert.
David The Window Wizard is a specialist in double-glazed door and window repairs, including fixing a double-glazed window that has been blocked or locked. He has a wealth of experience changing old window mechanisms to modern ones and can often save you the expense of replacing the whole window. Call or email us today for more information or a no-cost quote.
Warping
Double-glazed windows can be a great way to save energy in your home. They are composed of two separate panes which contain a spacer or dense gas in between them. This creates a seal that keeps cold air out and warm inside. In time, however windows can be damaged or broken and require repair. Fortunately, the majority of repairs are simple and can be completed without the expense of replacing the entire window.
Warping is a typical issue with double-glazed windows. This occurs when the windows begin to bend, bow or twist, which may alter the strength of the window and its insulation capabilities. Double glazed windows should be properly installed and maintained to avoid this issue.
If your double-glazed windows are beginning to warp, it is essential to speak with a professional immediately to prevent the situation from worsening. They will be able inspect your windows to determine the reason. They will use special tools to correct your issue and make sure that your windows are fully sealed again.
The most common cause of this issue is water vapour in the windows which can build up over time. It can be caused by many different reasons like weather conditions, humidity and temperature changes. To fix this problem, the specialist will drill out a small hole to release moisture. They will then use an agent to clean the glass and then apply sealant to help protect it from moisture in the future.
If your windows aren't able to be shut or opened it could be due to a broken mechanism or hinges. It is advisable to grease these parts of the window prior to calling in a professional, as this may resolve the issue and reduce the necessity for replacements. If your windows are worn out or don't offer the insulation you require, it may be better to replace them.